repositories / dotfiles

dotfiles

bugabingas dorkfiles

owned by bugabinga

nushell: completions

959c2b234e2c07f2c0a55b047ee836f543d6e1f8

Oliver Krylow <o.krylow@isp-insoft.de> ·

unsigned

Browse filesCompare with HEAD

Changed files (2)

nushell/completions/jj-completions.nu

Modified
35 35 --help(-h) # Print help (see more with '--help')
38 + # Move changes from a revision into the stack of mutable revisions
39 + export extern "jj absorb" [
40 + --from(-f): string # Source revision to absorb from
41 + --into(-t): string # Destination revisions to absorb into
42 + --to: string # Destination revisions to absorb into
43 + ...paths: string # Move only changes to these paths (instead of all paths)
44 + --repository(-R): string # Path to repository to operate on
45 + --ignore-working-copy # Don't snapshot the working copy, and don't update it
46 + --ignore-immutable # Allow rewriting immutable commits
47 + --at-operation: string # Operation to load the repo at
48 + --at-op: string # Operation to load the repo at
49 + --debug # Enable debug logging
50 + --color: string # When to colorize output (always, never, debug, auto)
51 + --quiet # Silence non-primary command output
52 + --no-pager # Disable the pager
53 + --config-toml: string # Additional configuration options (can be repeated)
54 + --help(-h) # Print help (see more with '--help')
55 + ]
38 57 # Apply the reverse of a revision on top of another revision
39 58 export extern "jj backout" [
40 59 --revisions(-r): string # The revision(s) to apply the reverse of
52 71 --help(-h) # Print help (see more with '--help')
55 - # Manage bookmarks
74 + # Manage bookmarks [default alias: b]
56 75 export extern "jj bookmark" [
57 76 --repository(-R): string # Path to repository to operate on
58 77 --ignore-working-copy # Don't snapshot the working copy, and don't update it
226 245 --help(-h) # Print help (see more with '--help')
229 - # Manage bookmarks
248 + # Manage bookmarks [default alias: b]
230 249 export extern "jj branch" [
231 250 --repository(-R): string # Path to repository to operate on
232 251 --ignore-working-copy # Don't snapshot the working copy, and don't update it
417 436 --help(-h) # Print help (see more with '--help')
420 - # Create a new, empty change and edit it in the working copy (DEPRECATED, use `jj new`)
421 - export extern "jj checkout" [
422 - revision: string # The revision to update to
423 - -r # Ignored (but lets you pass `-r` for consistency with other commands)
424 - --message(-m): string # The change description to use
425 - --repository(-R): string # Path to repository to operate on
426 - --ignore-working-copy # Don't snapshot the working copy, and don't update it
427 - --ignore-immutable # Allow rewriting immutable commits
428 - --at-operation: string # Operation to load the repo at
429 - --at-op: string # Operation to load the repo at
430 - --debug # Enable debug logging
431 - --color: string # When to colorize output (always, never, debug, auto)
432 - --quiet # Silence non-primary command output
433 - --no-pager # Disable the pager
434 - --config-toml: string # Additional configuration options (can be repeated)
435 - --help(-h) # Print help (see more with '--help')
438 439 def "nu-complete jj chmod mode" [] {
439 440 [ "n" "x" ]
891 892 # Compare file contents between two revisions
892 893 export extern "jj diff" [
893 894 --revision(-r): string # Show changes in this revision, compared to its parent(s)
894 - --from: string # Show changes from this revision
895 - --to: string # Show changes to this revision
895 + --from(-f): string # Show changes from this revision
896 + --to(-t): string # Show changes to this revision
896 897 ...paths: string # Restrict the diff to these paths
897 898 --summary(-s) # For each path, show only whether it was modified, added, or deleted
898 899 --stat # Show a histogram of the changes
920 921 # Touch up the content changes in a revision with a diff editor
921 922 export extern "jj diffedit" [
922 923 --revision(-r): string # The revision to touch up
923 - --from: string # Show changes from this revision
924 - --to: string # Edit changes in this revision
924 + --from(-f): string # Show changes from this revision
925 + --to(-t): string # Edit changes in this revision
925 926 --tool: string # Specify diff editor to be used
926 927 --restore-descendants # Preserve the content (not the diff) when rebasing descendants
927 928 --repository(-R): string # Path to repository to operate on
937 938 --help(-h) # Print help (see more with '--help')
940 - # Create a new change with the same content as an existing one
941 + # Create new changes with the same content as existing ones
941 942 export extern "jj duplicate" [
942 - ...revisions: string # The revision(s) to duplicate
943 - -r # Ignored (but lets you pass `-r` for consistency with other commands)
943 + ...revisions_pos: string # The revision(s) to duplicate (default: @)
944 + -r: string
945 + --destination(-d): string # The revision(s) to duplicate onto (can be repeated to create a merge commit)
946 + --insert-after(-A): string # The revision(s) to insert after (can be repeated to create a merge commit)
947 + --after: string # The revision(s) to insert after (can be repeated to create a merge commit)
948 + --insert-before(-B): string # The revision(s) to insert before (can be repeated to create a merge commit)
949 + --before: string # The revision(s) to insert before (can be repeated to create a merge commit)
944 950 --repository(-R): string # Path to repository to operate on
945 951 --ignore-working-copy # Don't snapshot the working copy, and don't update it
946 952 --ignore-immutable # Allow rewriting immutable commits
1262 1268 export extern "jj git push" [
1263 1269 --remote: string # The remote to push to (only named remotes are supported)
1264 1270 --bookmark(-b): string # Push only this bookmark, or bookmarks matching a pattern (can be repeated)
1265 - --all # Push all bookmarks (including deleted bookmarks)
1271 + --all # Push all bookmarks (including new and deleted bookmarks)
1266 1272 --tracked # Push all tracked bookmarks (including deleted bookmarks)
1267 1273 --deleted # Push all deleted bookmarks
1274 + --allow-new(-N) # Allow pushing new bookmarks
1268 1275 --allow-empty-description # Allow pushing commits with empty descriptions
1269 1276 --allow-private # Allow pushing commits that are private
1270 1277 --revisions(-r): string # Push bookmarks pointing to these commits (can be repeated)
1453 1460 # Compare the changes of two commits
1454 1461 export extern "jj interdiff" [
1455 - --from: string # Show changes from this revision
1456 - --to: string # Show changes to this revision
1462 + --from(-f): string # Show changes from this revision
1463 + --to(-t): string # Show changes to this revision
1457 1464 ...paths: string # Restrict the diff to these paths
1458 1465 --summary(-s) # For each path, show only whether it was modified, added, or deleted
1459 1466 --stat # Show a histogram of the changes
1511 1518 --help(-h) # Print help (see more with '--help')
1514 - # Merge work from multiple bookmarks (DEPRECATED, use `jj new`)
1515 - export extern "jj merge" [
1516 - ...revisions: string # Parent(s) of the new change
1517 - -d # Ignored (but lets you pass `-d`/`-r` for consistency with other commands)
1518 - --message(-m): string # The change description to use
1519 - --no-edit # Do not edit the newly created change
1520 - --edit # No-op flag to pair with --no-edit
1521 - --insert-after(-A): string # Insert the new change after the given commit(s)
1522 - --after: string # Insert the new change after the given commit(s)
1523 - --insert-before(-B): string # Insert the new change before the given commit(s)
1524 - --before: string # Insert the new change before the given commit(s)
1525 - --repository(-R): string # Path to repository to operate on
1526 - --ignore-working-copy # Don't snapshot the working copy, and don't update it
1527 - --ignore-immutable # Allow rewriting immutable commits
1528 - --at-operation: string # Operation to load the repo at
1529 - --at-op: string # Operation to load the repo at
1530 - --debug # Enable debug logging
1531 - --color: string # When to colorize output (always, never, debug, auto)
1532 - --quiet # Silence non-primary command output
1533 - --no-pager # Disable the pager
1534 - --config-toml: string # Additional configuration options (can be repeated)
1535 - --help(-h) # Print help (see more with '--help')
1538 - # Move changes from one revision into another (DEPRECATED, use `jj squash`)
1539 - export extern "jj move" [
1540 - --from(-f): string # Move part of this change into the destination
1541 - --to(-t): string # Move part of the source into this change
1542 - --interactive(-i) # Interactively choose which parts to move
1543 - --tool: string # Specify diff editor to be used (implies --interactive)
1544 - ...paths: string # Move only changes to these paths (instead of all paths)
1545 - --repository(-R): string # Path to repository to operate on
1546 - --ignore-working-copy # Don't snapshot the working copy, and don't update it
1547 - --ignore-immutable # Allow rewriting immutable commits
1548 - --at-operation: string # Operation to load the repo at
1549 - --at-op: string # Operation to load the repo at
1550 - --debug # Enable debug logging
1551 - --color: string # When to colorize output (always, never, debug, auto)
1552 - --quiet # Silence non-primary command output
1553 - --no-pager # Disable the pager
1554 - --config-toml: string # Additional configuration options (can be repeated)
1555 - --help(-h) # Print help (see more with '--help')
1558 1521 # Create a new, empty change and (by default) edit it in the working copy
1559 1522 export extern "jj new" [
1560 1523 ...revisions: string # Parent(s) of the new change
1633 1596 export extern "jj operation diff" [
1634 1597 --operation: string # Show repository changes in this operation, compared to its parent
1635 1598 --op: string # Show repository changes in this operation, compared to its parent
1636 - --from: string # Show repository changes from this operation
1637 - --to: string # Show repository changes to this operation
1599 + --from(-f): string # Show repository changes from this operation
1600 + --to(-t): string # Show repository changes to this operation
1638 1601 --no-graph # Don't show the graph, show a flat list of modified changes
1639 1602 --patch(-p) # Show patch of modifications to changes
1640 1603 --summary(-s) # For each path, show only whether it was modified, added, or deleted
1843 1806 # Restore paths from another revision
1844 1807 export extern "jj restore" [
1845 1808 ...paths: string # Restore only these paths (instead of all paths)
1846 - --from: string # Revision to restore from (source)
1847 - --to: string # Revision to restore into (destination)
1809 + --from(-f): string # Revision to restore from (source)
1810 + --to(-t): string # Revision to restore into (destination)
1848 1811 --changes-in(-c): string # Undo the changes in a revision as compared to the merge of its parents
1849 1812 --revision(-r): string # Prints an error. DO NOT USE
1850 1813 --restore-descendants # Preserve the content (not the diff) when rebasing descendants
2180 2143 --help(-h) # Print help (see more with '--help')
2146 + # Execute an external command via jj
2147 + export extern "jj util exec" [
2148 + command: string # External command to execute
2149 + ...args: string # Arguments to pass to the external command
2150 + --repository(-R): string # Path to repository to operate on
2151 + --ignore-working-copy # Don't snapshot the working copy, and don't update it
2152 + --ignore-immutable # Allow rewriting immutable commits
2153 + --at-operation: string # Operation to load the repo at
2154 + --at-op: string # Operation to load the repo at
2155 + --debug # Enable debug logging
2156 + --color: string # When to colorize output (always, never, debug, auto)
2157 + --quiet # Silence non-primary command output
2158 + --no-pager # Disable the pager
2159 + --config-toml: string # Additional configuration options (can be repeated)
2160 + --help(-h) # Print help (see more with '--help')
2183 2163 # Run backend-dependent garbage collection
2184 2164 export extern "jj util gc" [
2185 2165 --expire: string # Time threshold

nushell/completions/pueue-completions.nu

Modified
1 -module completions {
3 - def "nu-complete pueue color" [] {
4 - [ "auto" "never" "always" ]
5 - }
7 - # Interact with the Pueue daemon
8 - export extern pueue [
9 - --verbose(-v) # Verbose mode (-v, -vv, -vvv)
10 - --color: string@"nu-complete pueue color" # Colorize the output; auto enables color output when connected to a tty
11 - --config(-c): string # If provided, Pueue only uses this config file. This path can also be set via the "PUEUE_CONFIG_PATH" environment variable. The commandline option overwrites the environment variable!
12 - --profile(-p): string # The name of the profile that should be loaded from your config file
13 - --help(-h) # Print help
14 - --version(-V) # Print version
15 - ]
17 - # Enqueue a task for execution. There're many different options when scheduling a task. Check the individual option help texts for more information. Furthermore, please remember that scheduled commands are executed via your system shell. This means that the command needs proper shell escaping. The safest way to preserve shell escaping is to surround your command with quotes, for example: pueue add 'ls $HOME && echo "Some string"'
18 - export extern "pueue add" [
19 - ...command: string # The command to be added
20 - --working-directory(-w): string # Specify current working directory
21 - --escape(-e) # Escape any special shell characters (" ", "&", "!", etc.). Beware: This implicitly disables nearly all shell specific syntax ("&&", "&>")
22 - --immediate(-i) # Immediately start the task
23 - --stashed(-s) # Create the task in Stashed state. Useful to avoid immediate execution if the queue is empty
24 - --delay(-d): string # Prevents the task from being enqueued until 'delay' elapses. See "enqueue" for accepted formats
25 - --group(-g): string # Assign the task to a group. Groups kind of act as separate queues. I.e. all groups run in parallel and you can specify the amount of parallel tasks for each group. If no group is specified, the default group will be used
26 - --after(-a): string # Start the task once all specified tasks have successfully finished. As soon as one of the dependencies fails, this task will fail as well
27 - --priority(-o): string # Start this task with a higher priority. The higher the number, the faster it will be processed
28 - --label(-l): string # Add some information for yourself. This string will be shown in the "status" table. There's no additional logic connected to it
29 - --print-task-id(-p) # Only return the task id instead of a text. This is useful when working with dependencies
30 - --help(-h) # Print help
31 - ]
33 - # Remove tasks from the list. Running or paused tasks need to be killed first
34 - export extern "pueue remove" [
35 - ...task_ids: string # The task ids to be removed
36 - --help(-h) # Print help
37 - ]
39 - # Switches the queue position of two commands. Only works on queued and stashed commands
40 - export extern "pueue switch" [
41 - task_id_1: string # The first task id
42 - task_id_2: string # The second task id
43 - --help(-h) # Print help
44 - ]
46 - # Stashed tasks won't be automatically started. You have to enqueue them or start them by hand
47 - export extern "pueue stash" [
48 - ...task_ids: string # Stash these specific tasks
49 - --help(-h) # Print help
50 - ]
52 - # Enqueue stashed tasks. They'll be handled normally afterwards
53 - export extern "pueue enqueue" [
54 - ...task_ids: string # Enqueue these specific tasks
55 - --delay(-d): string # Delay enqueuing these tasks until 'delay' elapses. See DELAY FORMAT below
56 - --help(-h) # Print help
57 - ]
59 - # Resume operation of specific tasks or groups of tasks. By default, this resumes the default group and all its tasks. Can also be used force-start specific tasks.
60 - export extern "pueue start" [
61 - ...task_ids: string # Start these specific tasks. Paused tasks will resumed. Queued or Stashed tasks will be force-started
62 - --group(-g): string # Resume a specific group and all paused tasks in it. The group will be set to running and its paused tasks will be resumed
63 - --all(-a) # Resume all groups! All groups will be set to running and paused tasks will be resumed
64 - --children(-c) # Deprecated: this switch no longer has any effect
65 - --help(-h) # Print help
66 - ]
68 - # Restart failed or successful task(s). By default, identical tasks will be created and enqueued, but it's possible to restart in-place. You can also edit a few properties, such as the path and the command, before restarting.
69 - export extern "pueue restart" [
70 - ...task_ids: string # Restart these specific tasks
71 - --all-failed(-a) # Restart all failed tasks across all groups. Nice to use in combination with `-i/--in-place`
72 - --failed-in-group(-g): string # Like `--all-failed`, but only restart tasks failed tasks of a specific group. The group will be set to running and its paused tasks will be resumed
73 - --start-immediately(-k) # Immediately start the tasks, no matter how many open slots there are. This will ignore any dependencies tasks may have
74 - --stashed(-s) # Set the restarted task to a "Stashed" state. Useful to avoid immediate execution
75 - --in-place(-i) # Restart the task by reusing the already existing tasks. This will overwrite any previous logs of the restarted tasks
76 - --not-in-place # Restart the task by creating a new identical tasks. Only applies, if you have the restart_in_place configuration set to true
77 - --edit(-e) # Edit the tasks' commands before restarting
78 - --edit-path(-p) # Edit the tasks' paths before restarting
79 - --edit-label(-l) # Edit the tasks' labels before restarting
80 - --edit-priority(-o) # Edit the tasks' priorities before restarting
81 - --help(-h) # Print help
82 - ]
84 - # Either pause running tasks or specific groups of tasks. By default, pauses the default group and all its tasks. A paused queue (group) won't start any new tasks.
85 - export extern "pueue pause" [
86 - ...task_ids: string # Pause these specific tasks. Does not affect the default group, groups or any other tasks
87 - --group(-g): string # Pause a specific group
88 - --all(-a) # Pause all groups!
89 - --wait(-w) # Only pause the specified group and let already running tasks finish by themselves
90 - --children(-c) # Deprecated: this switch no longer has any effect
91 - --help(-h) # Print help
92 - ]
94 - # Kill specific running tasks or whole task groups.. Kills all tasks of the default group when no ids or a specific group are provided.
95 - export extern "pueue kill" [
96 - ...task_ids: string # Kill these specific tasks
97 - --group(-g): string # Kill all running tasks in a group. This also pauses the group
98 - --all(-a) # Kill all running tasks across ALL groups. This also pauses all groups
99 - --children(-c) # Deprecated: this switch no longer has any effect
100 - --signal(-s): string # Send a UNIX signal instead of simply killing the process. DISCLAIMER: This bypasses Pueue's process handling logic! You might enter weird invalid states, use at your own descretion
101 - --help(-h) # Print help
102 - ]
104 - # Send something to a task. Useful for sending confirmations such as 'y\n'
105 - export extern "pueue send" [
106 - task_id: string # The id of the task
107 - input: string # The input that should be sent to the process
108 - --help(-h) # Print help
109 - ]
111 - # Edit the command, path, label, or priority of a stashed or queued task. By default only the command is edited. Multiple properties can be added in one go.
112 - export extern "pueue edit" [
113 - task_id: string # The task's id
114 - --command(-c) # Edit the task's command
115 - --path(-p) # Edit the task's path
116 - --label(-l) # Edit the task's label
117 - --priority(-o) # Edit the task's priority
118 - --help(-h) # Print help
119 - ]
121 - # Use this to add or remove groups. By default, this will simply display all known groups.
122 - export extern "pueue group" [
123 - --json(-j) # Print the list of groups as json
124 - --help(-h) # Print help
125 - ]
127 - # Add a group by name
128 - export extern "pueue group add" [
129 - name: string
130 - --parallel(-p): string # Set the amount of parallel tasks this group can have. Setting this to 0 means an unlimited amount of parallel tasks
131 - --help(-h) # Print help
132 - ]
134 - # Remove a group by name. This will move all tasks in this group to the default group!
135 - export extern "pueue group remove" [
136 - name: string
137 - --help(-h) # Print help
138 - ]
140 - # Print this message or the help of the given subcommand(s)
141 - export extern "pueue group help" [
142 - ]
144 - # Add a group by name
145 - export extern "pueue group help add" [
146 - ]
148 - # Remove a group by name. This will move all tasks in this group to the default group!
149 - export extern "pueue group help remove" [
150 - ]
152 - # Print this message or the help of the given subcommand(s)
153 - export extern "pueue group help help" [
154 - ]
156 - # Display the current status of all tasks
157 - export extern "pueue status" [
158 - ...query: string # Users can specify a custom query to filter for specific values, order by a column or limit the amount of tasks listed. Use `--help` for the full syntax definition
159 - --json(-j) # Print the current state as json to stdout. This does not include the output of tasks. Use `log -j` if you want everything
160 - --group(-g): string # Only show tasks of a specific group
161 - --help(-h) # Print help (see more with '--help')
162 - ]
164 - # Accept a list or map of JSON pueue tasks via stdin and display it just like "pueue status". A simple example might look like this: pueue status --json | jq -c '.tasks' | pueue format-status
165 - export extern "pueue format-status" [
166 - --group(-g): string # Only show tasks of a specific group
167 - --help(-h) # Print help
168 - ]
170 - # Display the log output of finished tasks. Only the last few lines will be shown by default. If you want to follow the output of a task, please use the "follow" subcommand.
171 - export extern "pueue log" [
172 - ...task_ids: string # View the task output of these specific tasks
173 - --json(-j) # Print the resulting tasks and output as json. By default only the last lines will be returned unless --full is provided. Take care, as the json cannot be streamed! If your logs are really huge, using --full can use all of your machine's RAM
174 - --lines(-l): string # Only print the last X lines of each task's output. This is done by default if you're looking at multiple tasks
175 - --full(-f) # Show the whole output
176 - --help(-h) # Print help
177 - ]
179 - # Follow the output of a currently running task. This command works like "tail -f"
180 - export extern "pueue follow" [
181 - task_id?: string # The id of the task you want to watch. If no or multiple tasks are running, you have to specify the id. If only a single task is running, you can omit the id
182 - --lines(-l): string # Only print the last X lines of the output before following
183 - --help(-h) # Print help
184 - ]
186 - # Wait until tasks are finished. By default, this will wait for all tasks in the default group to finish. Note: This will also wait for all tasks that aren't somehow 'Done'. Includes: [Paused, Stashed, Locked, Queued, ...]
187 - export extern "pueue wait" [
188 - ...task_ids: string # This allows you to wait for specific tasks to finish
189 - --group(-g): string # Wait for all tasks in a specific group
190 - --all(-a) # Wait for all tasks across all groups and the default group
191 - --quiet(-q) # Don't show any log output while waiting
192 - --status(-s): string # Wait for tasks to reach a specific task status
193 - --help(-h) # Print help
194 - ]
196 - # Remove all finished tasks from the list
197 - export extern "pueue clean" [
198 - --successful-only(-s) # Only clean tasks that finished successfully
199 - --group(-g): string # Only clean tasks of a specific group
200 - --help(-h) # Print help
201 - ]
203 - # Kill all tasks, clean up afterwards and reset EVERYTHING!
204 - export extern "pueue reset" [
205 - --children(-c) # Deprecated: this switch no longer has any effect
206 - --force(-f) # Don't ask for any confirmation
207 - --help(-h) # Print help
208 - ]
210 - # Remotely shut down the daemon. Should only be used if the daemon isn't started by a service manager
211 - export extern "pueue shutdown" [
212 - --help(-h) # Print help
213 - ]
215 - # Set the amount of allowed parallel tasks By default, adjusts the amount of the default group. No tasks will be stopped, if this is lowered. This limit is only considered when tasks are scheduled.
216 - export extern "pueue parallel" [
217 - parallel_tasks?: string # The amount of allowed parallel tasks. Setting this to 0 means an unlimited amount of parallel tasks
218 - --group(-g): string # Set the amount for a specific group
219 - --help(-h) # Print help
220 - ]
222 - def "nu-complete pueue completions shell" [] {
223 - [ "bash" "elvish" "fish" "power-shell" "zsh" "nushell" ]
224 - }
226 - # Generates shell completion files. This can be ignored during normal operations
227 - export extern "pueue completions" [
228 - shell: string@"nu-complete pueue completions shell" # The target shell
229 - output_directory?: string # The output directory to which the file should be written
230 - --help(-h) # Print help
231 - ]
233 - # Print this message or the help of the given subcommand(s)
234 - export extern "pueue help" [
235 - ]
237 - # Enqueue a task for execution. There're many different options when scheduling a task. Check the individual option help texts for more information. Furthermore, please remember that scheduled commands are executed via your system shell. This means that the command needs proper shell escaping. The safest way to preserve shell escaping is to surround your command with quotes, for example: pueue add 'ls $HOME && echo "Some string"'
238 - export extern "pueue help add" [
239 - ]
241 - # Remove tasks from the list. Running or paused tasks need to be killed first
242 - export extern "pueue help remove" [
243 - ]
245 - # Switches the queue position of two commands. Only works on queued and stashed commands
246 - export extern "pueue help switch" [
247 - ]
249 - # Stashed tasks won't be automatically started. You have to enqueue them or start them by hand
250 - export extern "pueue help stash" [
251 - ]
253 - # Enqueue stashed tasks. They'll be handled normally afterwards
254 - export extern "pueue help enqueue" [
255 - ]
257 - # Resume operation of specific tasks or groups of tasks. By default, this resumes the default group and all its tasks. Can also be used force-start specific tasks.
258 - export extern "pueue help start" [
259 - ]
261 - # Restart failed or successful task(s). By default, identical tasks will be created and enqueued, but it's possible to restart in-place. You can also edit a few properties, such as the path and the command, before restarting.
262 - export extern "pueue help restart" [
263 - ]
265 - # Either pause running tasks or specific groups of tasks. By default, pauses the default group and all its tasks. A paused queue (group) won't start any new tasks.
266 - export extern "pueue help pause" [
267 - ]
269 - # Kill specific running tasks or whole task groups.. Kills all tasks of the default group when no ids or a specific group are provided.
270 - export extern "pueue help kill" [
271 - ]
273 - # Send something to a task. Useful for sending confirmations such as 'y\n'
274 - export extern "pueue help send" [
275 - ]
277 - # Edit the command, path, label, or priority of a stashed or queued task. By default only the command is edited. Multiple properties can be added in one go.
278 - export extern "pueue help edit" [
279 - ]
281 - # Use this to add or remove groups. By default, this will simply display all known groups.
282 - export extern "pueue help group" [
283 - ]
285 - # Add a group by name
286 - export extern "pueue help group add" [
287 - ]
289 - # Remove a group by name. This will move all tasks in this group to the default group!
290 - export extern "pueue help group remove" [
291 - ]
293 - # Display the current status of all tasks
294 - export extern "pueue help status" [
295 - ]
297 - # Accept a list or map of JSON pueue tasks via stdin and display it just like "pueue status". A simple example might look like this: pueue status --json | jq -c '.tasks' | pueue format-status
298 - export extern "pueue help format-status" [
299 - ]
301 - # Display the log output of finished tasks. Only the last few lines will be shown by default. If you want to follow the output of a task, please use the "follow" subcommand.
302 - export extern "pueue help log" [
303 - ]
305 - # Follow the output of a currently running task. This command works like "tail -f"
306 - export extern "pueue help follow" [
307 - ]
309 - # Wait until tasks are finished. By default, this will wait for all tasks in the default group to finish. Note: This will also wait for all tasks that aren't somehow 'Done'. Includes: [Paused, Stashed, Locked, Queued, ...]
310 - export extern "pueue help wait" [
311 - ]
313 - # Remove all finished tasks from the list
314 - export extern "pueue help clean" [
315 - ]
317 - # Kill all tasks, clean up afterwards and reset EVERYTHING!
318 - export extern "pueue help reset" [
319 - ]
321 - # Remotely shut down the daemon. Should only be used if the daemon isn't started by a service manager
322 - export extern "pueue help shutdown" [
323 - ]
325 - # Set the amount of allowed parallel tasks By default, adjusts the amount of the default group. No tasks will be stopped, if this is lowered. This limit is only considered when tasks are scheduled.
326 - export extern "pueue help parallel" [
327 - ]
329 - # Generates shell completion files. This can be ignored during normal operations
330 - export extern "pueue help completions" [
331 - ]
333 - # Print this message or the help of the given subcommand(s)
334 - export extern "pueue help help" [
335 - ]
339 -export use completions *